EWS Switch-VWT

Geotechnical Monitoring

EWS’s Switch-VWT (Vibrating Wire Telemetry) is a compact, low power, multi-comms data transmitter and VWP convertor in one.

It reads vibrating wire and temperature sensors and transmits frequency and temperature measurements wirelessly to the EWS web portal over either the Iridium Satellite Network or LTE.  The data is available for storage, processing and display as well as to export data into client databases via FTP, SFTP, XML, CSV or email.

The Australian manufactured Switch-VWT is ideal for new and retro-fit instrumentation projects where unattended collection of readings from VWP sensors is required.

Easy to set up and configure with a standard mobile device plus the EWS SwitchComm app, the Switch-VWT sets the global standard in Geotechnical Monitoring.


Easy to switch internal parts

EWS Switch-VWT is named for it’s easy ability to switch between internal parts. Easily change out the required component by hand.

First of its kind

The EWS Switch-VWT is the first ever vibrating wire multi sensor unit that enables connectivity via both the Iridium Satellite Network and Cellular data access.

Easy Plug ’n’ Play Deployment

EWS Switch-VWT enables multiple sensors and allows for up to 4 vibrating wires at a time, and is expandable to up to 8 vibrating wires.

Real-time Environmental Monitoring via the Iridium Satellite Network

EWS Switch-VWT

The Switch-VWT can read 4 VWP and 4 temperature sensors, and can power and control up to 8 VWP sensors when coupled with the VW expansion unit.

The datalogger component communicates with the VWP convertor using the SDI-12 protocol.

For ease of installation the Switch-VWT is pre-programmed for simple plug and play onsite. The VWP sensors are connected to the Switch-VWT via a simple pluggable screw terminal block.

The user then connects via Bluetooth to the unit to take a manual reading to confirm the installation.


Benefits

  • Works with most VWP sensors
  • Locally manufactured in Australia
  • Extremely compact and rugged compared to other options
  • Locally supported
  • Plug and play setup onsite
  • Ideal for short or long-term, unattended deployments

  • Easy to relocate
  • Quick and easy to install
  • Perfect for new and retrofit instrumentation projects
  • Switch and software are supported worldwide
  • Tested and proven in the Pilbara Region

Features

  • Interchangeable comms options; send data via Iridium and LTE Cellular
  • Low power draw with internal battery back up
  • 5 year battery life
  • 12-24v external power or direct solar panel input
  • Separate terminal block for multiple additional sensor inputs (Modbus, counter SDI-12, 4-20mA)
  • Bluetooth embedded for local app connection and programming
  • Remotely change settings with two-way communications including via Iridium
  • Small compact form factor; Approx. 150x60x60mm
  • Lightweight; 250g
  • LED’s for external verification/diagnostics
  • Reads up to 4 x VWP sensors with thermistors (4 x sensors per Switch-VWT, expandable to 8)
  • Auto sweep frequency scanning configuration (450-6000Hz)
  • Auto configured excitation voltage (5v/12v)
  • Automatic data upload directly to the dedicated EWS web portal

Download

Download the EWS Switch-VWT specification sheet.

Request a quote

Need more info or ready to discuss your requirements?
EWS Environment - Water - Geotechnical - Data

EWS Australia

PO Box 638
Claremont, 6010
Perth, Western Australia

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.


© 2021 EWS Australia. All rights reserved. Website by Joomstore